-->

Mudahnya install printer HP D2566 @Suse 10.0



Install printer HP Deskjet D2566 di linux sangat simple dibandingkan dengan install di windows

Kalau di windows (saya menggunakan windows xp, install printer ini membutuhkan waktu beberapa menit soalnya software yang harus di install lumayan banyak. Lain halnya ketika di install di Linux Suse 10.0, tidak membutuhkan waktu lama. Suse 10.0 secara default telah mengenal printer HP D2566. Dengan driver menggunakan HP Deskjet 2500 series foomatic/hpijs,hpijs 2.8.10.33.

Ketika menginstall printer pastikan kabel usb printer telah konek ke CPU. Turn on Printer. Install dilakukan lewat YAST.

YAST automatic deteksi printer HP Deskjet D2566 Printer (CB675A), edit untuk konfigurasi, pilih driver Deskjet 2500 series foomatic/hpijs,hpijs 2.8.10.33. Test. Jika Ok, next finish dech...

tapi sebelumnya harus install hplip 2.8.10.33.run di suse. Installnya cukup mudah tinggal klik filenya, terus ikuti intruksinya.

HP Linux Imaging and Printing System (ver. 2.8.10)
HPLIP Installer ver. 5.0

Copyright (c) 2001-8 Hewlett-Packard Development Company, LP
This software comes with ABSOLUTELY NO WARRANTY.
This is free software, and you are welcome to distribute it
under certain conditions. See COPYING file for more details.

Installer log saved in: hplip-install_Fri-28-Nov-2008_09:06:50.log

\
note: Defaults for each question are maked with a '*'. Press to accept
the default.


INSTALLATION MODE
-----------------
Automatic mode will install the full HPLIP solution with the most common
options.
Custom mode allows you to chose installation options to fit specific
requirements.

Please choose the installation mode (a=automatic*, c=custom, q=quit) : c

Initializing. Please wait...


INSTALL TYPE
------------
For most users, it is recommended to install HPLIP with full support (scanning,
faxing, toolbox, etc).
For servers or minimal installations, you can also install print support only
(HPIJS only).

Install full hplip support (recommended) or print-only support (f=full hplip
support*, p=printing only support, q=quit) ?p


INTRODUCTION
------------
This installer will install HPIJS version 2.8.10 on your computer.
Please close any running package management systems now (YaST, Adept, Synaptic,
Up2date, etc).


DISTRO/OS CONFIRMATION
----------------------
Distro appears to be SUSE Linux 10.0.

Is "SUSE Linux 10.0" your correct distro/OS and version (y=yes*, n=no, q=quit)
? y


SELECT HPLIP OPTIONS
--------------------
You can select which HPLIP options to enable. Some options require extra
dependencies.

Do you wish to enable 'CUPS support for HPIJS' (y=yes*, n=no, q=quit) ? n


ENTER ROOT/SUPERUSER PASSWORD
-----------------------------
Please enter the root/superuser password:
Password accepted


RUNNING PRE-INSTALL COMMANDS
----------------------------


READY TO BUILD AND INSTALL
--------------------------
Ready to perform build and install. Press to continue or 'q' to quit:


PRE-BUILD COMMANDS
------------------


BUILD AND INSTALL
-----------------
Running './configure --with-hpppddir=/usr/share/cups/model/HP --prefix=/usr
--disable-qt4 --enable-foomatic-ppd-install --enable-doc-build --enable-qt3
--enable-gui-build --disable-foomatic-drv-install --disable-pp-build
--enable-network-build --disable-dbus-build --enable-hpijs-only-build
--enable-scan-build --disable-fax-build'
Please wait, this may take several minutes...
Command completed successfully.

Running 'make clean'
Please wait, this may take several minutes...
Command completed successfully.

Running 'make'
Please wait, this may take several minutes...
Command completed successfully.

Running 'su -c "make install"'
Please wait, this may take several minutes...
Command completed successfully.


Build complete.



download filenya disini
sourceforge.net



Selamat mencoba



LihatTutupKomentar